Products in 3D

The technology inside our solar packages

Rotate every device we install in 3D and read the technical data exactly as the manufacturer states it.

25 products from all current packages
Models built to scale from the manufacturer installation manuals
Every value sourced to a datasheet or manual

W x H x D: 490 x 460 x 130 mm
Weight: 21 kg

Huawei

Huawei SUN2000-12K-MAP0

Installed by Free State AG

Three-phase hybrid inverter rated 12 kW AC, the largest model in the MAP0 series, used in the SolarAbo M package together with AIKO Neostar 3P54 modules and a Huawei LUNA2000 battery. It carries a separate 600 to 980 V DC battery port and talks to the battery over RS485 from its own COM port, so the battery needs no additional inverter or gateway to be charged and discharged, and arc fault detection (AFCI) to UL 1699B-2018 runs on the PV side. The Swiss grid code SWITZERLAND-NA/EEA:2020-LV230 is selectable in the inverter, and backup supply during a grid outage requires the separate SmartGuard-63A-T0, which Huawei rates at 20 ms or less switchover with MAP0 inverters.

Rated AC power (grid): 12 kW
Max. efficiency: 98.6 %
MPP trackers: 2
Max. battery charging power: 12 kW

Included in

SolarDirect M Huawei

Compare packages

Book a consultation

Technical datasheet (PDF)

Technical data

All figures for the Huawei SUN2000-12K-MAP0 from the manufacturer datasheet and manual

Open datasheet (PDF)

Power

Rated AC power (grid): 12 kW
Max. apparent power (grid): 13.2 kW
Max. apparent power: 13.2 kVA
Recommended max. PV power: 22000 Wp
Max. efficiency: 98.6 %
European efficiency: 98.2 %

Electrical

MPP trackers: 2
Max. input current per MPP tracker: 16 A
Max. short-circuit current per MPPT: 22 A
Max. number of PV inputs: 2
MPPT operating voltage range: 160 to 1000 V
Max. DC input voltage: 1100 V

Battery

Battery DC inputs: Yes, 600 to 980 V DC, max. 20 A, Li-ion. Compatible batteries LUNA2000-5/10/15-S0 and LUNA2000-7/14/21-S1
Battery control interface: RS485 over the inverter COM port (RJ45), directly between inverter and battery
Max. battery charging power: 12 kW
Max. battery discharging power: 12 kW

Grid

Phases: Three-phase, 3W/N+PE
Rated grid voltage: 220/380, 230/400, 240/415 V AC
Rated grid frequency: 50 / 60 Hz
Rated output current at 400 V: 17.3 A
Max. output current (at 380 / 400 / 415 V): 19.1 A
Power factor range: 0.8 leading to 0.8 lagging

Connectivity

Communication: Built-in WLAN 802.11b/g/n, RS485, DC MBUS. WLAN or Ethernet via the optional SDongleA-05, 4G via the optional SDongleB-06
Energy management device: EMMA-A01 and EMMA-A02 supported (manual Issue 01). The current Huawei material calls the same role SmartAssistant and gives no model number

Mechanical

Ingress protection: IP66
Overvoltage category: PV II / AC III
Surge protection: DC and AC, compatible with TYPE II protection class per EN/IEC 61643-11
Cooling: Natural convection, no fan
Noise emission: 29 dB
Operating temperature range: -25 to +60 °C

Warranty

Manufacturer warranty: 10 years

Certifications: EN/IEC 62109-1, EN/IEC 62109-2, EN 50549-1, VDE-AR-N 4105, IEC 61727, IEC 62116, UTE 15-712-1/VFR 2019, CEI 0-21:2020-12 V1, C10/C11, EN/IEC 61643-11 TYPE II compatible surge protection, UL 1699B-2018 (arc fault detection)

Source: manufacturer datasheet and installation manual, as of September 2026. Subject to change, the manufacturer documents prevail.

Product photos

Huawei SUN2000-12K-MAP0 as shown by the manufacturer

Experiences

What customers say about the Huawei SUN2000-12K-MAP0

Loading comments

SolarDirect

Check the solar potential of your roof

Start solar calculator

Smart solar solutions for private households