Products in 3D

The technology inside our solar packages

Rotate every device we install in 3D and read the technical data exactly as the manufacturer states it.

25 products from all current packages
Models built to scale from the manufacturer installation manuals
Every value sourced to a datasheet or manual

W x H x D: 546 x 460 x 241.7 mm
Weight: 21 kg

Huawei

Huawei SUN2000-25K-MB0

Installed by Free State AG

Three-phase hybrid inverter rated 25 kW AC, the largest model in the MB0 series, used in the SolarAbo XL package together with AIKO Neostar 3P54 modules and a Huawei LUNA2000 S1 battery. It takes four PV strings across two MPP trackers and has two separate battery terminals on a 600 to 980 V DC port, with up to 25 kW of battery charging power when both terminals are populated, and arc fault detection (AFCI) is built in. It uses fan-assisted air cooling and is rated below 50 dB, so the mounting position matters more than with the smaller MAP0 models, and the Swiss grid code SWITZERLAND-NA/EEA:2020-LV230 is selectable in the inverter.

Rated AC power (grid): 25 kW
Max. efficiency: 98.4 %
MPP trackers: 2
Max. battery charging power: 21 kW with one string, 25 kW with two strings

Included in

SolarDirect XL Huawei

Compare packages

Book a consultation

Technical datasheet (PDF)

Technical data

All figures for the Huawei SUN2000-25K-MB0 from the manufacturer datasheet and manual

Open datasheet (PDF)

Power

Rated AC power (grid): 25 kW
Max. apparent power (grid): 27.5 kW
Max. apparent power: 27.5 kVA
Recommended max. PV power: 37500 Wp
Max. efficiency: 98.4 %
European efficiency: 98.2 %

Electrical

MPP trackers: 2
Max. input current per MPP tracker: 30 A with two strings, 20 A with a single string
Max. short-circuit current per MPPT: 40 A
Max. number of PV inputs: 4
MPPT operating voltage range: 200 to 1000 V
Max. DC input voltage: 1100 V

Battery

Battery DC inputs: Yes, two battery terminals, 600 to 980 V DC, max. 26.25 A per string, Li-ion. Compatible batteries LUNA2000-5/10/15-S0 and LUNA2000-7/14/21-S1, up to four batteries (two per terminal)
Battery control interface: RS485 from the inverter COM port, directly between inverter and battery
Max. battery charging power: 21 kW with one string, 25 kW with two strings
Max. battery discharging power: 25 kW

Grid

Phases: Three-phase, 3W/N+PE
Rated grid voltage: 220/380, 230/400, 240/415 V AC
Rated grid frequency: 50 / 60 Hz
Rated output current at 400 V: 36.1 A
Max. output current (at 380 / 400 / 415 V): 39.9 A
Power factor range: 0.8 leading to 0.8 lagging

Connectivity

Communication: Built-in WLAN 802.11b/g/n, RS485, DC MBUS. WLAN or Ethernet via the optional SDongleA-05, 4G via the optional SDongleB-06
Energy management device: EMMA-A01 and EMMA-A02 supported (manual Issue 09). The current manual calls the same role SmartAssistant and gives no model number

Mechanical

Ingress protection: IP66
Overvoltage category: PV II / AC III
Surge protection: DC TYPE II, AC compatible with TYPE II protection class per EN/IEC 61643-11
Cooling: Smart air cooling, fan assisted
Noise emission: 50 dB
Operating temperature range: -25 to +60 °C

Warranty

Manufacturer warranty: 10 years

Certifications: EN/IEC 62109-1, EN/IEC 62109-2, EN 50549-1, EN 50549-2, VDE-AR-N 4105, VDE-AR-N 4110, IEC 61727, IEC 62116, IEC 61683, EN 50530, CEI 0-21:2020-12 V1, CEI 0-16, C10/C11, EN/IEC 61643-11 TYPE II compatible surge protection, UL 1699B-2018 (arc fault detection)

Source: manufacturer datasheet and installation manual, as of September 2026. Subject to change, the manufacturer documents prevail.

Product photos

Huawei SUN2000-25K-MB0 as shown by the manufacturer

Experiences

What customers say about the Huawei SUN2000-25K-MB0

Loading comments

SolarDirect

Check the solar potential of your roof

Start solar calculator

Smart solar solutions for private households