Products in 3D

The technology inside our solar packages

Rotate every device we install in 3D and read the technical data exactly as the manufacturer states it.

25 products from all current packages
Models built to scale from the manufacturer installation manuals
Every value sourced to a datasheet or manual

W x H x D: 234 x 384 x 139 mm
Weight: 4.5 kg

Sigenergy

Sigenergy Sigen EVAC 11

Installed by Free State AG

The Sigen EVAC 11 is an 11 kW three-phase AC wallbox, 6 to 16 A per phase on a 380 to 415 V connection. It comes either with an attached Type 2 cable or with a Type 2 socket with shutter. Authentication is by RFID card, by the mySigen app or automatic with no authentication, and it speaks OCPP 1.6J ED 2 over 4G, WLAN or Ethernet. Together with a SigenStor it charges from PV surplus with a settable battery boost priority and battery cut-off state of charge, and with a Sigen Power Sensor it does dynamic load management so the house connection is not overloaded. The enclosure is rated IP65 and IK10, the integrated fault detection covers AC 30 mA and DC 6 mA, and Sigenergy gives 3 years of warranty in Europe.

Nominal charging power: 11 kW
Vehicle connection: Type 2, permanently attached 5 m cable
Solar surplus charging: Supported. Charges from PV surplus with a battery boost priority setting and a battery cut-off SOC setting.
Grid import limiting: Supported

Included in

SolarDirect S Sigenergy
SolarDirect M Sigenergy
SolarDirect L Sigenergy
SolarDirect XL Sigenergy

Compare packages

Book a consultation

Technical datasheet (PDF)

Technical data

All figures for the Sigenergy Sigen EVAC 11 from the manufacturer datasheet and manual

Open datasheet (PDF)

Power

Nominal charging power: 11 kW
Vehicle connection: Type 2, permanently attached 5 m cable
Solar surplus charging: Supported. Charges from PV surplus with a battery boost priority setting and a battery cut-off SOC setting.
Grid import limiting: Supported
Automatic phase switchover: Supported
Randomized charging delay: Supported

Electrical

Max. output current: 6 to 16 A
Metering: External meter over RS485, or integrated metering IC

Grid

Phases: Three phase, 3W+N+PE, 220 to 240 / 380 to 415 V
Grounding system: TT, TN, IT
Rated grid frequency: 50 / 60 Hz

Connectivity

Start and stop: RFID card, app, or auto-charge with no authentication
Communication: 4G, WLAN, Fast Ethernet
Protocol: OCPP 1.6J ED 2, RS485 Modbus RTU
Display: LED indicator and app

Mechanical

Charging cable length: 5 m
Residual current protection: AC 30 mA + DC 6 mA
Ingress protection: IP65
Impact protection: IK10
Operating temperature range: -30 to +55 °C
Dimensions (W / H / D): 234 / 384 / 139 mm

Warranty

Manufacturer warranty: 3 years

Certifications: EN IEC 61851-1, EN IEC 61851-21-2, IEC 62955, EN IEC 62311, EN 50665, ETSI EN 300 330 V2.1.1, ETSI EN 300 328 V2.2.2, ETSI EN 301 511 V12.5.1, EN 18031-1, Radio Equipment Directive 2014/53/EU, RoHS 2011/65/EU and (EU) 2015/863

Source: manufacturer datasheet and installation manual, as of September 2026. Subject to change, the manufacturer documents prevail.

Product photos

Sigenergy Sigen EVAC 11 as shown by the manufacturer

Experiences

What customers say about the Sigenergy Sigen EVAC 11

Loading comments

SolarDirect

Check the solar potential of your roof

Start solar calculator

Smart solar solutions for private households